Seagate ST3000DM007 Data Recovery

We offer professional data recovery services for the Seagate ST3000DM007 hard drive. Whether your drive has stopped spinning, is clicking, or is not detected by your computer, our expert technicians are here to help. We accept mail-in jobs Australia-wide, so you can send your drive to us from anywhere with confidence.

seagate st3000dm007 data recovery

Seagate ST3000DM007 Common Problems

Clicking or knocking noise due to head crash
Drive not detected by BIOS or Disk Management
Firmware corruption causing busy state
PCB failure from power surge or overheating
Slow responding drive due to bad sectors
Logical damage including partition loss or deleted files
Seized spindle motor or stuck heads

Seagate ST3000DM007 Models

ST3000DM007-1WY10G
ST3000DM007-2DM166

ST3000DM007-1WY10G clicking issue Data Recovery Caselog

12Feb25: Customer mailed in hard drive for data recovery. The hard drive clicks and spins down 0003 in the Seagate terminal. There is no visible damage inside this hard drive. V11 family, no preamp in ROM. PCB # 100815595 REV D. This is very rare drive to find parts for. The drive has 2 platters, 3 heads (H0, H1, H3).

10Jul25: MHA SWAP with the drive that had 4 heads. IDd but started clicking and spanning a lot of errors in the terminal. Techmode patch. MCMT is corrupted. Restarted twice and was able to load utility.