Seagate ST8000VN004 Data Recovery
Zero Alpha offers professional data recovery for ST8000VN004 hard drives, part of Seagate’s NAS-optimised IronWolf series. These drives are commonly available in 8TB capacity and are designed for continuous operation in multi-bay systems. Users may face issues such as failed heads, bad sectors, firmware corruption, or RAID degradation when used inside NAS units. We handle all ST8000VN004 failures and accept mail in jobs from Australia and worldwide.
Seagate ST8000VN004 Common Problems
- Bad sectors developing across the platters causing slow or failed reads
- Media damage from head crashes
- Firmware corruption including translator issues or module failure
- PCB faults or power-related damage
- Clicking, beeping, or failure to spin up
- RAID degradation when used inside NAS units such as Synology or QNAP
- Logical problems including deleted data or corrupted NAS file systems
ST8000VN004-2M2101 Data Recovery caselog
02Jun25: This ironwolf nas drive was part of 3 drives connected to a synology nas box. The drives do id but they occasionally spin down when you try to read from them.
ST8000VN004-3CP101 Data Recovery Caselog
01Dec25: This 8TB IronWolf hard drive was removed from a set of 2 from a SYNOLOGY DS223J nas system. The system failed during a lightning storm even though it had a ups. Both drives were presented to us being completely zero filled. There is a reset button on the back and we were told that staff and IT support tried to reset the synology software. The pcb is 100871827 REV A and has 2 rom chips winbond Q33JWUS13. The family is C6 CimarronBP Exos. Firmware is locked: BootCode is locked! Use programmer for ROM reading! The USON 4x3 mm chip.