SanDisk X600 SSD Data Recovery

We offer professional data recovery for SanDisk X600 SSD. We accept mail-in jobs Australia-wide. Whether your drive has failed suddenly or is showing early warning signs, our team has the tools and expertise to recover your valuable data quickly and securely.

SanDisk X600 Common Problems

• SSD not detected in BIOS or operating system
• Firmware corruption preventing normal operation
• Bad NAND flash sectors causing read/write errors
• Controller chip failure
• Physical PCB damage from electrical surges
• Data corruption after power loss
• Drive stuck in read-only mode
• Slow performance and frequent freezing

SanDisk X600 SSD Models

• SanDisk X600 2.5" 7mm SATA III SSD
• SanDisk X600 M.2 2280 SATA III SSD

SANDISK SD9SB8W-128G-1006 Data Recovery Caselog

11Aug25: This SSD was mailed in from Toowoomba QLD and was used in a CNC machine when it stopped to boot giving the error: Boot device not found. Please install an operating system on your hard disk. We we're able to recover all the data again. Controller: Marvell 88SS1074-BSW2. 

SanDisk X600 2280 SD9SN8W-128G-1006 Data Recovery Caselog

08Sep25: This M.2 SanDisk ssd was removed from a laptop because it failed to boot up. A computer shop checked it and said it needs to be taken to Zero Alpha for data recovery. The ssd would not detect in a standard reader but we were able to get it to read using our professional tools. It has smart issues flagged and is unstable but all data came back. Controller: Marvel 88SS1074-BSW2. PMIC: 9040VM339.